Skip to main content

Oil / Gas Fired Hot Air Generators (Thermair)

Hot Air Generators

Thermair, hot air generators consist of a shell & tube type heat exchanger which is duly insulated to prevent radiation losses. The ventilation blower fitted along-side blows fresh air over the combustion chamber and the set of smoke tubes. In oil/gas fired Boiler options, an imported mono-block type fully automatic burner is provided for combustion of fuel. Thermair, Hot Air Generators can also be offered in solid fuel firing options. A dust-proof, pre-wired control panel is also supplied as a standard supply to control the operation of the unit based on customer requirements.

Heating Options


  • Liquid Fuels – Light oil / Heavy oil
  • Gaseous fuels – LPG or CNG
  • Solid Fuels – Coal or Wood or Briquettes

Advantages:-

  1. Fully automatic unit
  2.  Trouble free operation.
  3. Outside the purview of IBR.
  4. High system efficiency
  5. Clean and controlled hot air available.
  6. High productivity in processes
  7. Minimum site work and ease of installation

Capacity 
                  Thermair, Hot Air Generator is available in capacities from 30,000 Kcal/hr to 10 Lac Kcal/hr.

Popular posts from this blog

4 MAJOR ADVANTAGES OF AIR PREHEATER IN BOILER

4 MAJOR ADVANTAGES OF AIR PREHEATER IN BOILER:
1.Increased thermal efficiency
2. Short payback period & increased combustion rate
3. In the case of combustion of pulverized coal hot air can be used for drying the coal as well as for burning the coal efficiently
4. All standard fuels and even lower grades of coals can be burnt efficiently with hot air

Thermodyne Boilers is a successful manufacturing the Boiler accessories like Air Preheaters, Economizers, Superheaters etc.

What is Wet Scrubber?

Wet Scrubbers are the pollution control equipment that helps in controlling the pollution by reducing the concentration of pollutants such as Sulfur dioxide (SO2) and ash content in exhaust flue gases.
As the pollution norms are getting stringent and the government is making sure that pollution laws are being implemented, many industries are coming up with various solutions and strategies for reducing the pollution and its management. One such solution is using pollution control equipment such as Wet Scrubbers.

Industries or power plants generally have boilers or furnaces installed in their processes where combustion of fuel is taking place. Combustion of fuel generates flue gases that contain a large amount of heat which is transferred to water to convert into steam. These fuels generally contain carbon, sulfur, hydrogen, oxygen and on combustion with air, they form flue gases containing Sulfur dioxide (SO2), Carbon dioxide (CO2), Ash, Water vapor (H2O). Out of these SO2 and Ash …

Why Do We Need A Fusible Plug?

Fusible Plug is a fitting used in Steam Boilers to enhance the safety during operation. It’s working depends upon the water level in the Boiler shell. A fusible Plug is a threaded metallic cylindrical object, with a tapered hole in it which goes through its entire length. It is usually of brass, bronze or even gunmetal. In a smoke tube steam boiler, it is fitted on the front tube sheet, just above the tubes (used for flue gas flow) arrangement but below the perforated feed line inside the shell.


But the question is how exactly this little thing helps in preventing a huge disaster. It’s working is dependent only on the temperatures not on pressures. What happens is that during steam boiler operation, the feed pumps to supply water for steam conversion in the Boiler shell on the basis of the signal sent to it by the electrical panel. And electrical panel receives this signal from the mobrey (automatic water level controller) based on the fluctuating water levels due to conti…